Leave Your Message
High Temperature Vacuum Drying Oven

Featured products

Products Categories
Featured Products

High Temperature Vacuum Drying Oven

  • ● Vacuum drying to remove the moisture and solvent in the electrode materials.
  • ● Max. temperature 300℃/400℃ is optional
  • ● Operating vacuum range 101kPa -1Pa● Available in 3 sizes, large capacity

    FEATURESproduct

    Vacuum ovens are ideal for removing residual water, solvents or other volatile compounds from temperature-sensitive products, or provide an ultra-low level of oxygen concentration environment. The principle of operation, essentially, is to remove unwanted molecules by lowering the pressure in the oven (creating a vacuum). When the oven pressure reaches the desired vapor pressure of the contaminants, these contaminant molecules evaporate, turn to vapor, and are removed from all areas of the product. This drying is accomplished without the use of excessive heat. This makes vacuum drying suitable for materials that become damaged or are changed if exposed to high temperatures. Vacuum drying also minimizes the risk of scaling and the formation of oxidation residues. Vacuum high temperature ovens are typically used for products that are not heat resistant and are temperature sensitive. This type of oven is widely used in semiconductor, MEMS, electronic area.

    ● Easy to operate, fixed value operation, program operation, quick auto stop proceeding, auto stop operation, auto start operation can be realized.
    ● Temperature control is PID mode touch screen instrument, single point type or program type temperature control, can be automatically calculated, PV/SV display at the same time, point touch setting, with memory function (such as temperature, time).
    ● According to technical requirements, be able to run the complicated programs.
    ● With self-diagnostic circuit (temperature sensing abnormality, heater disconnection, automatic over-rise prevention, SSR short circuit), over-rise preventer, leakage protection switch to prevent over-current, key lock and other safety functions.
    ● Vacuum control mode automatic control, reach the vacuum degree to stop vacuuming, below the lower limit automatically start, so that the cycle of work, constant temperature time is completed, stop working; manually unpressurized air or nitrogen filling.
    ● Provide standard and customized functions in a variety of sizes and temperature ranges.

    Parametersproduct

    Model

    GZ-BDT-VC-02

    GZ-BDT-VC-01

    Temp. Range

    RT+80℃-300℃/400℃

    Pressure Range

    101 kPa to 1 Pa

    (760 Torr to 0.0075 Torr) at absolute pressure

    Temp. Regulation Accuracy

    ±1℃

    Temp. Distribution Accuracy

    ±1.5%℃

    Interior Dimensions HxWxD(mm)

    450x450x450

    600x600x600

    Exterior Dimensions HxWxD(mm)

    1500 x750 x750

    1720x950 x950

    Shelves

    2 plates

    4 plates

    Workspace Capacity

    91L

    216L

    Cooling System

    Air cooling system or Water-cooling system for 300℃/400℃ types

    Control System

    LCD touch screen with PLC

    Safety Device

    Door detector switch, overheat protector, oxygen content monitor, low water pressure detection, low gas pressure detection, fan overload detection, overcurrent ELB etc.

    Power Supply

    3 phase AC 380V or as request

    Optionsproduct

    Temperature recorders (paper or paperless)6gj
    Shelves
    HEPA Filterort
    Vacuum Pump
    Temperature recorders (paper or paperless)z71
     Temperature recorders (paper or paperless)
    Ethernet communicationsmf3
    Ethernet communications

    Customizationproduct

    GMS can provide varying levels of uniformity, size, temperature range; if you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements.

    Customizationgah

    Packaging & Shippingproduct

    Packaging:
    Export wooden standard package. (non-log, non-solid wood, no fumigation, meet export standards)

    Shipping:
    We have the excellent cooperative forwarder to support transportation service including FOB, CIF, DDP and so on, to satisfy customer's special demands.

    Serviceproduct

    GMS Industrial has markets, sales, technical service and network team to provide customers and dealers with comprehensive pre-sales, in-sales and after-sales services. You can communicate with us if you have any questions and requirements.
    24 hours online. Messages will be replied as soon as they are received.

    inquiry now