Q&A
What should be paid attention to when using the dry cabinet?
1. Please install the dry cabinet on a suitable level ground, make the center of gravity of the dry cabinet at the best position, and fix the rotating casters at the bottom of the cabinet to make the cabinet stable.
2. Please place the dry cabinet in a level place away from high temperature and direct sunlight, so as not to affect the working performance of the dry cabinet.
3. In order to make the dehumidifier smoothly exhaust moisture, please keep the back of the cabinet at least 10cm away from other objects (away from the air-conditioning inlet and outlet).
4. Don't put the dry cabinet in a damp or splashy place. The splashed water or dirt should be wiped clean with a soft cloth in time.
5. Keep the area around the dry cabinet clean. It is strictly forbidden to put inflammable and explosive dangerous goods and strong corrosive acids and alkalis.
6. Regularly check the indicator status of the control panel, the temperature and humidity indicator status, whether the screen display is clear, whether there is any defect, abnormal flashing or screen skipping, and the control buttons.
7. When the dry cabinet is used for the first time, it needs to run for 24 hours before putting the product in.
8. When the humidity reaches the set value and stabilizes, open the door for a few minutes to check whether the humidity display value rises in the cabinet.
9. It is not suitable to store items with high moisture absorption in the dry cabinet, such as cardboard, leather, desiccant, etc. The strong hygroscopicity of these products will cause the dehumidifying uniformity of the dehumidification system to be disordered.
10. If it is not necessary, it is recommended not to open the cabinet door frequently, which will cause temporary instability of humidity.
11. It is best to read the product manual of the dry cabinet carefully before use, and operate in accordance with the regulations to avoid unnecessary problems.
What is the difference between the dry cabinet and the nitrogen cabinet?
The biggest difference is mainly in performance and functionality. In terms of performance, the physical dehumidification dry cabinet can be set to medium humidity, low humidity and ultra-low humidity according to storage requirements, and the ultra-low humidity capacity can also reach a relatively good state. But in terms of dehumidifying speed, it is far from being compared with the nitrogen cabinet. The nitrogen cabinet needs to be used in conjunction with nitrogen, and has the ability to quickly dehumidify. It can quickly drop humidity to below 2% RH. It only takes about 5-10 minutes to recover the set value after opening and closing the door, so that it is suitable for frequent door opening and closing occasions.
In terms of functionality, the physical dehumidification dry cabinet can still be used to continue dehumidifying after the power is cut off, and the humidity will not rise by more than 10% within 24 hours. The nitrogen cabinet mainly uses the humidity setting value to control the air intake, which can improve the cleanliness of the cabinet and has the effect of anti-oxidation.
Is the maintenance of the dry cabinet complicated?
GMS dry cabinet mainly adopts modular design, from small parts to large temperature and humidity display, control system and dehumidifier module, which can be quickly replaced. They are easy maintenance and repair, greatly improving maintenance efficiency. Maintenance of the dehumidifier movement needs to remove the four screws of the movement on the back of the dry cabinet, and install a new movement. Therefore, even if the dry cabinet fails, the maintenance is very convenient and simple.